Code:
VAR Kirka = '0x0F39' ; Òèï Êèðêè
VAR MaxVes = 320 ;
VAR TileNum = '1341' ;
VAR x, y, t, k
VAR MaxTime = 100 ;
VAR ms1 = "There is nothing"
VAR ms2 = "You have"
VAR ms3 = "You put"
VAR ms4 = "You loosen some rocks"
VAR ms5 = "That is too far away"
VAR ms6 = "Try mining in rock"
VAR ms7 = "You can't see that"
VAR ms8 = "Try mining"
var MaxTraceDistance=6
var TraceLoopIncrease=5
var LimitTrace=20
var Speed=1
var StepTimeOut=500
# Äëÿ õîäüáû - 500+Ping
# Äëÿ áåãà/õîäüáû íà ëîøàäè - 300+Ping
# Áåã íà ëîøàäè - 150 + Ping
var CheckCnt=2
var DynamicPause=30
var SumkaDom='0x40DA5983' #
var Forge='0x400715D4'
var Sunduk='0x40DA5983'
sub main()
while not uo.dead()
walker(2367,827,0);
Mine_Around();
# DropAll()
# uo.usetype('0x0C5C',-1);
walker(2370,824,0);
Mine_Around();
# DropAll()
walker(2372,820,0);
Mine_Around();
# DropAll()
walker(2369,818,0);
Mine_Around();
walker(2365,820,0);
# DropAll()
# walker(1254,2655,0);
Mine_Around();
# DropAll()
walker(2365,823,0);
Mine_Around();
# DropAll()
walker(2361,824,0);
Mine_Around();
# DropAll()
sub home()
walker(2356,805,0);
walker(2348,809,0);
walker(2348,837,0);
walker(2365,852,0);
walker(2356,865,0);
walker(2342,881,0);
walker(2327,881,0);
walker(2327,904,0);
walker(2324,906,0);
wait (1000)
#SmeltIron()
DropAll()
wait(1000)
shaxta()
sub shaxta()
walker(2327,904,0);
walker(2327,881,0);
walker(2342,881,0);
walker(2356,865,0);
walker(2365,852,0);
walker(2355,843,0);
walker(2348,837,0);
walker(2348,810,0);
walker(2356,805,0);
walker(2362,818,0);
walker(2365,821,0);
main()
end sub
sub DropAll()
wait(500)
#uo.useobject(Sunduk)
uo.setreceivingcontainer(Sunduk)
#uo.setcatchbag(SumkaDom)
wait(1000)
while uo.count('0x19B9')>0
uo.findtype('0x19B9')
uo.moveitem('finditem','1000',Sunduk)
wait(700)
wend
wait(500)
while uo.count('0x1BEF')>0
uo.findtype('0x1BEF')
uo.moveitem('finditem','1000',Sunduk)
wait(700)
wend
wait(500)
while uo.count('0x1BE3')>0
uo.findtype('0x1BE3')
uo.moveitem('finditem','1000',Sunduk)
wait(700)
wend
end sub
sub SmeltIron()
var orecount = 0
uo.IgnoreReset()
uo.FindType('0x19B9')
while uo.FindCount()
orecount = uo.GetQuantity('finditem')
while orecount > 9
uo.UseObject('finditem')
while orecount == uo.GetQuantity('finditem')
wait(100)
wend
orecount = uo.GetQuantity('finditem')
wend
if orecount then
uo.Ignore('finditem')
end if
uo.FindType('0x19B9')
wend
end sub
sub GetPickaxe()
var tmp,p;
if uo.count("0x0F3A")<2 then
uo.useobject(SumkaDom);
Wait(300);
tmp=uo.count("0x0F3A");
uo.findtype('0x0F3A',-1,SumkaDom);
uo.grab(1,'finditem');
p=0;
while tmp==uo.count("0x0E85") and p<20
wait(100);
p=p+1;
wend
end if
end sub
sub Mine_Around()
for y=-2 to 2
for x=-2 to 2
k = 0
repeat
UO.DeleteJournal()
t = UO.Timer()
k = k + 1
UO.CancelTarget()
wait(300)
while NOT UO.Hidden()
UO.DeleteJournal()
UO.Warmode('0')
UO.UseSkill('Hiding')
repeat
wait(1000)
until UO.InJournal('You have hidden') OR UO.InJournal('seem to hide') OR UO.InJournal('preoccupied') or UO.Dead()
wend
UO.WaitTargetTile( -1, STR( UO.GetX() + x ), STR( UO.GetY() + y ), STR(UO.GetZ()) )
UO.UseType( Kirka )
repeat
wait(300)
until UO.InJournal(ms1) OR UO.InJournal(ms2) OR UO.InJournal(ms3) OR UO.InJournal(ms4) OR UO.InJournal(ms5) OR UO.InJournal(ms6) OR UO.InJournal(ms7) OR UO.InJournal(ms8) OR ((t + MaxTime) < UO.Timer())
wait(300)
If UO.Weight > MaxVes Then
home()
UO.Print(" Overweight!" )
return
Endif
until ( NOT UO.InJournal(ms4) AND NOT UO.InJournal(ms3) OR (k > 10) )
next
next
endsub
Sub Walker(GoX,GoY,Prec)
UO.SetGlobal("Logging","0")
UO.SetGlobal("BlindWalk","0")
var LastDir
var MoveRes
var TracerCnt
UO.SetGlobal("GlobalGoX",str(GoX))
UO.SetGlobal("GlobalGoY",str(GoY))
while not IsEnd(GoX,GoY,Prec)
TracerCnt = MaxTraceDistance
repeat
LogInfo('Just walking')
LastDir=GoUntilHit(GoX,GoY,Prec)
if IsEnd(GoX,GoY,Prec) then
return 1
end if
LogInfo('Tracing')
MoveRes = FullAroundTrace(LastDir,GoX,GoY,Prec,TracerCnt)
if TracerCnt > LimitTrace then
return 0
endif
TracerCnt = TracerCnt + TraceLoopIncrease
until MoveRes == 1
wend
return 1
end sub
Sub FullAroundTrace(StartDir,GoX,GoY,Prec,MaxTrace)
var LineX=UO.GetX()
var LineY=UO.GetY()
var CurDir=StartDir
var Direction=CountDirection(GoX,GoY,CurDir,Prec)
var StartX,StartY
var MovesDone=0
repeat
StartX=UO.GetX()
StartY=UO.GetY()
CurDir=Tracer(CurDir,Direction,Prec)
if (CurDir==GetDir(GoX,GoY,Prec)) then
return 1
endif
if MovesDone>0 and PrevMoveCross(GetDirToDir(UO.GetDir(),Prec),LineX,LineY,GoX,GoY,StartX,StartY,Prec) then
return 1
end if
MovesDone=MovesDone+1
CurDir=AddToDir(CurDir,-Direction,Prec)
until MovesDone>MaxTrace
return 0
end sub
Sub CountDirection(GoX,GoY,StartDir,Prec)
var GoDir=GetDir(GoX,GoY,Prec)
var MyX=UO.GetX()
var MyY=UO.GetY()
if GoDir<StartDir then
return -1
end if
if GoDir>StartDir then
return 1
end if
if Abs(MyX-GoX)>Abs(MyY-GoY) then
if (GoDir==3 and GoY>MyY) OR (GoDir==7 and GoY<MyY) then
return -1
else
return 1
end if
else
if (GoDir==1 and GoX<MyX) or (GoDir==5 and GoX>MyX) then
return -1
else
return 1
end if
end if
end sub
Sub PrevMoveCross(Dir,x1,y1,x2,y2,StartX,StartY,Prec)
var x3,y3,x4,y4
x3=StartX
y3=StartY
x4=StartX+(XFromDir(Dir)-StartX)*Speed
y4=StartY+(YFromDir(Dir)-StartY)*Speed
return LinesCrossing(x1,y1,x2,y2,x3,y3,x4,y4,Prec)
end sub
Sub LinesCrossing(x1,y1,x2,y2,x3,y3,x4,y4,Prec)
if x1==x3 and y1==y3 then
return false
end if
var z1=(x3-x1)*(y2-y1)-(y3-y1)*(x2-x1)
var z2=(x4-x1)*(y2-y1)-(y4-y1)*(x2-x1)
if z1*z2>0 then
return false
else
LogInfo('Vector info:')
LogInfo('x1= '+str(x1))
LogInfo('y1= '+str(y1))
LogInfo('x2= '+str(x2))
LogInfo('y2= '+str(y2))
LogInfo('x3= '+str(x3))
LogInfo('y3= '+str(y3))
LogInfo('x4= '+str(x4))
LogInfo('y4= '+str(y4))
return true
end if
end sub
Sub IsDiap(X,X0,X1,Prec)
if X<=X0+Prec and X>=X1-Prec OR X>=X0-Prec and X<=X1+Prec then
return true
end if
return false
end sub
Sub GoUntilHit(GoX,GoY,Prec)
var LastDir
LastDir=GetDir(GoX,GoY,Prec)
var CouldMove
repeat
LastDir=GetDir(GoX,GoY,Prec)
if LastDir<>0 and not IsEnd(GoX,GoY,Prec) then
CouldMove=TryDir(LastDir,Prec)
end if
until LastDir==0 or IsEnd(GoX,GoY,Prec) or not CouldMove
return LastDir
end sub
Sub IsEnd(GoX,GoY,Prec)
if Abs(UO.GetX()-GoX)<=Prec and Abs(UO.GetY()-GoY)<=Prec then
LogInfo('END FOUND')
return true
else
return false
end if
end sub
Sub GetDir(GoX,GoY,Prec)
var MyX=UO.GetX()
var MyY=UO.GetY()
var DiffX=Abs(UO.GetX()-GoX)
var DiffY=Abs(UO.GetY()-GoY)
var GoDir=0
if (DiffX/(DiffY+0.1))>=2 then
if (MyX>GoX) then
GoDir=7
else
GoDir=3
end if
else
if (DiffY/(DiffX+0.1))>=2 then
if (MyY>GoY) then
GoDir=5
else
GoDir=1
end if
else
if (MyX>GoX) and (MyY>GoY) then
GoDir=6
else
if (MyX>GoX) and (MyY<GoY) then
GoDir=8
else
if (MyX<GoX) and (MyY>GoY) then
GoDir=4
else
if (MyX<GoX) and (MyY<GoY) then
GoDir=2
end if
end if
end if
end if
end if
end if
return GoDir
end sub
Sub Tracer(StartDir,Direction,Prec)
var CurDir=StartDir
var Result
repeat
Result=TryDir(CurDir,Prec)
if not Result then
CurDir=AddToDir(CurDir,Direction,Prec)
end if
until Result
return Result
end sub
Sub AddToDir(Dir,Cnt,Prec)
var NewDir=Dir
NewDir=NewDir+Cnt
while NewDir>8
NewDir=NewDir-8
wend
while NewDir<1
NewDir=NewDir+8
wend
return NewDir
end sub
Sub TryDir(Dir,Prec)
var BegX=UO.GetX() # Ia?aeuiia O
var BegY=UO.GetY() # Ia?aeuiia Y
var Counter=0
var GoX=BegX
var GoY=BegY
GoX=XFromDir(Dir)
GoY=YFromDir(Dir)
if not IsPass(GoX,GoY) then
LogInfo(str(GoX)+':'+str(GoY)+' is not passable')
return false
end if
return TurnAndGoDir(Dir,Prec)
end sub
Sub XFromDir(Dir)
if Dir==2 OR Dir==3 Or Dir==4 then
return (UO.GetX()+1)
end if
if Dir==6 OR Dir==7 Or Dir==8 then
return (UO.GetX()-1)
end if
return (UO.GetX())
end sub
Sub YFromDir(Dir)
if Dir==8 OR Dir==1 Or Dir==2 then
return (UO.GetY()+1)
end if
if Dir==4 OR Dir==5 Or Dir==6 then
return (UO.GetY()-1)
end if
return (UO.GetY())
end sub
Sub TurnAndGoDir(Dir,Prec)
var StartDir=GetDirToDir(UO.GetDir(),Prec)
var StartX=UO.GetX()
var StartY=UO.GetY()
var EndDir
var Counter=0
var TestCounter=CheckCnt
#Direction Test
repeat
Counter = 0
LogInfo('Dir: '+str(StartDir)+' Counter: '+str(Counter))
PressDir(Dir)
repeat
EndDir=GetDirToDir(UO.GetDir(),Prec)
wait(DynamicPause)
Counter=Counter+1
until StartDir<>EndDir or StartY<>UO.GetY() or StartX<>UO.GetX() or Counter>=StepTimeOut/DynamicPause
TestCounter = TestCounter - 1
LogInfo('Dir: '+str(EndDir)+' Counter: '+str(Counter))
until TestCounter <= 0 or Counter < StepTimeOut/DynamicPause
if Counter>=StepTimeOut/DynamicPause then
LogInfo('Direction timeout reached')
return 0
end if
#End direction Test
if StartY<>UO.GetY() or StartX<>UO.GetX() then
return Dir
end if
#Start Primary test
TestCounter=CheckCnt
repeat
GoDir(Dir,Prec)
Counter=0
repeat
wait(DynamicPause)
Counter=Counter+1
until StartY<>UO.GetY() or StartX<>UO.GetX() or Counter>=StepTimeOut/DynamicPause
TestCounter = TestCounter - 1
until TestCounter <= 0 or Counter < StepTimeOut/DynamicPause
#End primary test
if Counter>=StepTimeOut/DynamicPause then
LogInfo('Step timeout reached')
return 0
else
return Dir
end if
end sub
Sub GetDirToDir(GotDir,Prec)
var ChangedDir=-GotDir
ChangedDir=AddToDir(ChangedDir,5,Prec)
return ChangedDir
end sub
Sub DirToInj(Dir)
dim Dirs[9]
Dirs[1]=1
Dirs[2]=2
Dirs[3]=3
Dirs[4]=6
Dirs[5]=9
Dirs[6]=8
Dirs[7]=7
Dirs[8]=4
return (Dirs[Dir])
end sub
Sub PressDir(Dir)
dim Dirs[9]
Dirs[1]=35
Dirs[2]=40
Dirs[3]=34
Dirs[4]=39
Dirs[5]=33
Dirs[6]=38
Dirs[7]=36
Dirs[8]=37
UO.Press(Dirs[Dir],1)
end sub
Sub GoDir(Dir,Prec)
dim Dirs[9]
Dirs[1]=35
Dirs[2]=40
Dirs[3]=34
Dirs[4]=39
Dirs[5]=33
Dirs[6]=38
Dirs[7]=36
Dirs[8]=37
var DistanceX=Abs(UO.GetX()-val(UO.GetGlobal("GlobalGoX")))
var DistanceY=Abs(UO.GetY()-val(UO.GetGlobal("GlobalGoY")))
var GoDistance
if (DistanceX-Prec)<Speed then
GoDistance=DistanceX-Prec
else
if (DistanceY-Prec)<Speed then
GoDistance=DistanceY-Prec
else
GoDistance=Speed
endif
endif
UO.Press(Dirs[Dir],GoDistance)
end sub
Sub IsPass(X,Y)
if UO.GetGlobal("BlindWalk") then
return true
endif
dim Types[60]
Types[1]=3
Types[2]=25
Types[3]=51
Types[4]=63
Types[5]=113
Types[6]=140
Types[7]=172
Types[8]=219
Types[9]=232
Types[10]=235
Types[11]=239
Types[12]=243
Types[13]=248
Types[14]=251
Types[15]=264
Types[16]=267
Types[17]=282
Types[18]=289
Types[19]=321
Types[20]=379
Types[21]=420
Types[22]=440
Types[23]=476
Types[24]=499
Types[25]=513
Types[26]=542
Types[27]=578
Types[28]=586
Types[29]=622
Types[30]=700
Types[31]=804
Types[32]=1740
Types[33]=1758
Types[34]=1770
Types[35]=1779
Types[36]=1779
Types[37]=1881
Types[38]=1886
Types[39]=1801
Types[40]=1805
Types[41]=1813
Types[42]=1820
Types[43]=1831
Types[44]=1833
Types[45]=1843
Types[46]=1850
Types[47]=1873
Types[48]=1876
Types[49]=1885
Types[50]=1888
Types[51]=1946
Types[52]=1969
Types[53]=2500
Types[54]=2539
for var i=1 TO 53 STEP 2
if UO.PrivateGetTile(X,Y,-1,Types[i],Types[i+1]) then
return true
end if
next
return false
end sub
Sub LogInfo(Line)
if not UO.GetGlobal("Logging")=="0" then
UO.TextOpen()
UO.TextPrint(str(UO.GetX())+":"+str(UO.GetY())+" - "+Line);
end if
end sub
Sub Abs(X)
if X>0 then
return X
else
return (-X)
end if
end sub
sub Reconnect()
var ReconnectTime,rFlag
ReconnectTime='0'
rFlag=1
repeat
while (uo.ObjAtLayer('Bpack')=='')
if rFlag then
ReconnectTime=MakeTime()
rFlag=0
end if
wait(200000)
uo.Say('')
wait(3000)
uo.Say('')
wait(3000)
uo.Say('')
wait(3000)
uo.LDblClick(357,164)
uo.LClick(616,459)
wait(3000)
wait(5000)
UO.Exec("terminate main")
wait(1000)
uo.Exec('exec main')
end if
wend
wait(3000)
if (rFlag==0) and (ReconnectTime<>'0') then
uo.TextOpen()
uo.TextPrint('Disconnected & Reconnected @ '+ReconnectTime)
rFlag=1
ReconnectTime='0'
end if
until false
end sub
sub MakeTime()
var d,t,ret,i
ret=str(uo.Time())
t=""
for i=0 to Len(ret)
t=ret[Len(ret)-i]+t
if (i==2) or (i==4) then
t=":"+t
end if
next
ret=str(uo.Date())
d=""
for i=0 to Len(ret)
d=ret[Len(ret)-i] + d
if (i==2) or (i==4) then
d="."+d
end if
next
ret=t+" @ "+d
return ret
end sub
Register
Login
FAQ
Search
